Rapid determination of acetaminophen in physiological fluids by liquid chromatography using SDS mobile phase and ED detection

Acetaminophen is determined in serum and urine samples by a rapid, sensitive, and precise chromatographic method without any pretreatment step in a C18 column using a pure micellar mobile phase of 0.02M sodium dodecyl sulfate at pH 7. Acetaminophen is eluted in less than 5 min with no interference of the protein band. The use of electrochemical and UV detection is compared. Linearities (r > 0.999), as well as intra- and interday precision, are studied in the validation of the method. Limits of detection (LOD) are also calculated to be 0.56, 0.83, and 0.74 ng/mL in micellar solution, serum, and urine using electrochemical detection. The developed micellar liquid chromatographic method is useful for the quantitation of acetaminophen in serum and urine. Recoveries in the biological matrices are in the 98-107% range and results are compared with those obtained using a reference method. Drug excretion (in urine) and serum distribution are studied in several healthy volunteers, and no interference from metabolites is found. The developed procedure can be applied in routine analyses, toxicology, and therapeutic monitoring.     

Complexing tendencies of UO 22+ and Th4+ in their mixed ligand complexes with aminopolycarboxylates and resorcinol or its derivatives

Formation contants (log K _MAL ^MA ) of mixed ligand complexes MAL, where M = UO ₂ ²⁺ or Th⁴⁺, A = IMDA, NTA, HEDTA, EDTA, CDTA or DTPA, and L = resorcinol (res), 2-methyl resorcinol (2-Me-res), 5-methyl resorcinol (5-Me-res) or 4-chloro resorcinol (4-Cl-res), have been determined pH-metrically by the Irving-Rossotti approach at 25°C and at an ionic strength,I = 0.2(moldm⁻³KNO₃). The observed stability sequences are IMDA > NTA > HEDTA > EDTA > CDTA > DTPA, and 4-Cl-res > 5-Me-res > 2-Me-res > res with respect to primary and secondary ligands, respectively. Th⁴⁺ forms more stable mixed complexes than UO ₂ ²⁺ . The A ΔlogK values are negative due mainly to the charge repulsion involved in the complexation MA + L⇋MAL.     

Synthesis and biological evaluation of 4-thiazolidinone derivatives as antitubercular and antimicrobial agents

New series of N-[2-{2-(substitutedphenyl)-4-oxo-5-(substitutedbenzylidene)-1,3-thiazolidine}-iminoethyl]-2-amino-5-nitrothiazole, 5(a–m) have been synthesized from 2-amino-5-nitrothiazole as a starting material by conventional as well as microwave methods. All the synthesized compounds 4(a–m) were screened for their antibacterial and antifungal activities against some selected bacteria and fungi and antitubercular activity screened against Mycobacterium tuberculosis. The structure of all the synthesized compounds were confirmed by chemical and spectral analyses such as IR, ¹H NMR, ¹³C NMR and FAB-Mass.     

A review on recent advances in hierarchically porous metal and metal oxide nanostructures as electrode materials for supercapacitors and non-enzymatic glucose sensors

The remarkable significance of electrode materials in industrial processes, energy, sustainability and diabetes monitoring has captivated scientists to develop advance nanomaterials for the benefit of life across the globe. Here in, the recent developments in nanostructured porous metal and metal oxide composite materials for supercapacitor applications and non-enzymatic glucose sensors (NEGS) has been extensively discussed. The essential and active electrode materials from the research and application perspective has been emphasized in detail. We have also evaluated the worthiness, taxonomical classification, efficiency, specific capacitance and sensitivity of these materials for the aforementioned potential applications. Eventually, we concluded the review by providing the aspect ratio, surface morphology, particle size and specific surface area of these materials that plays an indispensable role for their promising potential applications.     

Effect of Yb3+ concentration on photoluminescence properties of cubic Gd2O3 phosphor

Yb³⁺ doped phosphor of Gd₂O₃ (Gd₂O₃:Yb³⁺) have been prepared by solid state reaction method. The structure and the particle size have been determined by X-ray powder diffraction measurements. The average particle size of the phosphor is in between 35 and 50 nm. The particle size and structure of the phosphor was further confirmed by TEM analysis. The visible and NIR luminescence spectra were recorded under the 980 nm laser excitation. The visible upconversion luminescence of Yb³⁺ ion was due to cooperative luminescence and the presence of rare earth impurity ions. The cooperative upconversion and NIR luminescence spectra as a function of Yb³⁺ ion concentration were measured and the emission intensity variation with Yb³⁺ ion concentration was discussed. Yb³⁺ energy migration quenched the cooperative luminescence of Gd₂O₃:Yb³⁺ phosphor with doping level over 5%, while the NIR emission luminescence continuously increases with increasing Yb³⁺ ion concentration.     

Conventional and microwave synthesis,spectral, thermal and antimicrobial studies of some transition metal complexes containing 2-amino-5-methylthiazole moiety

Schiff base metal complexes of Cr(III), Co(II), Ni(II) and Cu(II) derived from 5-chlorosalicylidene-2-amino-5-methylthiazole (HL¹) and 2-hydroxy-1-naphthylidene-2-amino-5-methylthiazole (HL²) have been synthesized by conventional as well as microwave methods. These compounds have been characterized by elemental analysis, FT-IR, FAB-mass, molar conductance, electronic spectra, ¹H-NMR, ESR, magnetic susceptibility, thermal, electrical conductivity and XRD analyses. The complexes exhibit coordination number 4 or 6. The complexes are coloured and stable in air. Analytical data reveal that all the complexes exhibit 1:2 (metal:ligand) ratio. IR data show that the ligand coordinates with the metal ions in a bidentate manner through the phenolic oxygen and azomethine nitrogen. FAB-mass and thermal data show degradation pattern of the complexes. The thermal behaviour of metal complexes shows that the hydrated complexes lose water molecules of hydration in the first step; followed by decomposition of ligand molecules in the subsequent steps. XRD patterns indicate crystalline nature for the complexes. The Schiff bases and metal complexes show good activity against the Gram-positive bacteria; Staphylococcus aureus and Gram-negative bacteria; Escherichia coli and fungi Aspergillus niger and Candida albicans. The antimicrobial results also indicate that the metal complexes are better antimicrobial agents as compared to the Schiff bases.     

Phase diagram of P3HT:PC70BM thin films based on variable-temperature spectroscopic ellipsometry

In this article, we present the research on the influence of the composition of thin films of a blend of poly (3-hexylthiophene −2,5-diyl) - P3HT with fullerene derivatives [6,6]-phenyl-C71-butyric acid methyl ester – PC70BM and [6,6]-phenyl-C61-butyric acid methyl ester – PC60BM on their thermal transitions. The influence of molar mass (Mw) of P3HT (Mw = 65.2; 54.2 and 34.1 kDa) and PCBM (PC60BM – Mw = 911 g/mol and PC70BM – Mw = 1031 g/mol) is examined in details. The article presents significantly expanded research compared to our previous work on thermal transitions in thin films of blend P3HT (Mw = 65.2 kDa) with PC60BM. For this reason, we also compare current results with previous ones. Here, we present for the first time a phase diagram of thin films of the P3HT(Mw = 65.2 kDa):PC70BM blend using variable-temperature ellipsometry. Our research reveals the presence of characteristic temperatures of pure phases in thin films of P3HT: PCBM blends. It turns out that the cold crystallization temperature of the P3HT phase in P3HT(Mw = 65.2 kDa):PC70BM blend films is lower than corresponding temperature in P3HT(Mw = 65.2 kDa):PC60BM blend films. At the same time, the cold crystallization temperature of the PC70BM phase behaves inversely. We demonstrate also that variable-temperature spectroscopic ellipsometry is a very sensitive technique for studying thermal transitions in these thin films. In addition, we show that the entire phase diagram can be determined based on the raw ellipsometric data analysis, e.g. using a delta angle at wavelength λ = 280 nm.